180W 24V Electric wheelchair Hub Motor with Joystick

THIS HUB MOTOR AND CONTRL SYSTEM ARE SPECIALLY DESIGNED FOR ELECTRIC WHEEL CHAIR,THE CONTROL SYSTEM WITH JOYSTICK CAN BE DRIVED THE TWO HUB MOTORS AT THE SAME TIME. One set including two hub motors and one control system!!!   Motor type: Brushless DC Motor with Gear Rated Power :180W Rated Voltage :DC24V Speed :8km/h       Control system Specification and Instruction: 1. Instruction of K-X1 controller K-X1 mobility controller is developed high-level electronic item, specially for electric wheelchair or other electric mobility K-X1 has many special advantages,as follows, . A big and clear colorful LCD screen . Easy set up on the menu .Procedural functions buttons, wheelchair mode function can be optional directly .Small resistance joystick: 2.3N .Embedded joystick is easily replacement .Cables can be position on left side or right side .Series no. can be showed when installed .Time can be showed .Voice available .USB pot for phone charge 2. Specification Working Voltage: 20V-30VDC(Normal 24V) Charger rated power:48W Static current:50mA Material: ABS plastic Water proof:IP53 Weight: 346g Operating force:2.3N Working tem. -20- 50 degree Reserve tem.-40-70degree Working Humidity:0-95%RH 3. Assembly The joystick can be installed either side of the wheelchair. Put the joystick on a plate which wide 72mm,or on a pipe with diameter of 15mm and 20mm. Note: Please use 7mm-11mm bolt, don’t fasten too tightly The K-X1 controller not completely water proof, try to avoid the water     Joystick drawing:       Motor drawing:       Connection Sample: